IoT Devices is not an alarm-monitoring, emergency-response or life-safety system. This article says what that means in practice.
What not to rely on it for
- Protecting life, health or property.
- Detecting or responding to fire, smoke, carbon monoxide, flooding, intrusion or a medical emergency.
- Controlling equipment whose failure could cause injury or death.
Keep independent, approved safety equipment in place, and call your local emergency number in an emergency.
Why
- Notifications, alarms, automations and voice commands depend on device vendors' services, networks and power. They can be delayed, can fail, and can act on out-of-date information.
- A vendor can change or end its service, its limits or its pricing at any time. Affected devices or functions may then stop working or be removed.
- A command whose result cannot be confirmed is shown as Unconfirmed and is never retried automatically. Check the device itself.
- A numeric reading, such as a temperature, is stored at most once every 30 seconds for each reading on a device, unless it crosses a limit that an automation or alarm watches. What you see can be up to that much behind the device.
- If your plan ends or IoT Devices is turned off, alarms and automations stop with it. See IoT Devices and Your Plan.
- Alarms here supplement your approved smoke, carbon monoxide and other safety systems. They never replace them.
Health devices
Remote patient monitoring does not watch readings continuously and is not an emergency service. Readings from health devices are for review by your organization's clinicians. They are not a diagnosis or treatment.
What the platform does to help
- A safety-critical control cannot be used until someone turns it on for that device, with a recorded reason and their password. It can be set to Needs two people, so that a second person confirms every use. Safety-critical controls are never available to SI members, links or voice.
- Security actions can ask for a password, as often as your organization sets, and every one is recorded.
- Every command is written to a record that no one in your organization can edit or delete.
Your responsibility
You decide who in your organization may operate each device, and what you share, automate or expose to voice. Do not give access to anyone who is not entitled to it, and do not use the platform to operate a device in a way that could injure a person or damage property.
관련 기사
이 질문에 대한 답변을 다른 가이드.
Uncertain 명령은 무엇을 의미합니까
명령은 공급 업체에 도달 할 수있을 때 Unconfirmed이지만 장치가 작동했는지 확인하지 않습니다. 플랫폼은 추측하지 않으며 명령을 다시 보내지 않습니다. 당신이 그것을 볼 곳 : 당신이 사용한 통제의 밑에: 우리는 그것을 일어난 것을 확인할 수 없었습니다. 다시 시도하기 전에 장치를 확인합니다. 장치의 명령 섹션에서, 행의 상태가 Unconfirmed, 경고 아이콘으로 표시. 명령이…
How to Create an Alarm Rule
An alarm rule says what raises an alarm, how serious it is, and who is told. Alarms here supplement your approved smoke, carbon monoxide and other safety systems. They never replace them. Before you start You need the…
Alarm Escalation 설명
에스컬레이션은 알람이 누군가에게 도달하도록 합니다. 아무도 그것을 인정하지 않는 경우, 다음 단계는 더 많은 사람들을 말한다, 등. 정책은 단계의 목록입니다. 에스컬레이션 정책은 8 단계까지 있습니다. 각 단계는 그것이 일어날 때, 누가 말하고 방법. 첫 번째 단계는 즉시 될 수 있습니다. 앞으로 각 단계는, 경보가 올려진 후에 대부분의 7 일에서 나중에 옵니다. 나중에 단계는 아무도가…
IoT 장치가 무엇인지, 그리고 그것이 아닙니다
IoT 장치 링크 스마트 장치 계정 조직은 이미 당신의 자물쇠, 보온장치, 조명, 센서, 미터 및 차량 뒤에 응용 프로그램 또는 클라우드 계정과 같은, 그래서 당신의 팀은 볼 수 있습니다, 제어, 공유 및 한 곳에서 자동화. 그것은 판매하지 않습니다, 설치, 호스트 또는 장치를 작동, 그리고 그것은 공급 업체의 자신의 응용 프로그램을 대체하지 않습니다: 장치 공급 업체와 함께 유지, 각…
Device Functions and Safety Classes Explained
Every device is made of functions: the things you can read or do with it, such as reading a lock's state, locking, unlocking, setting a level or reading a temperature. Access in IoT Devices is given per function, not…
Acknowledge에 대한 방법
알람은 당신이 그것을 본 다른 모든 것을 말해주고 그것을 취급합니다. 또한 정책의 다음 단계에 대한 경보를 중지합니다. 시작하기 전에 Acknowledge IoT 알람이 오른쪽과 알람의 장치에 액세스해야합니다. 장치 (IoT)을 열 수 있는 사람은 알람 탭을 볼 수 있지만, 이 권리는 Acknowledge를 참조하십시오. 웹에서 1. 열린 장치 (IoT) → 알람, 또는 알람 알림에서…
