IoT Devices is not an alarm-monitoring, emergency-response or life-safety system. This article says what that means in practice.
What not to rely on it for
- Protecting life, health or property.
- Detecting or responding to fire, smoke, carbon monoxide, flooding, intrusion or a medical emergency.
- Controlling equipment whose failure could cause injury or death.
Keep independent, approved safety equipment in place, and call your local emergency number in an emergency.
Why
- Notifications, alarms, automations and voice commands depend on device vendors' services, networks and power. They can be delayed, can fail, and can act on out-of-date information.
- A vendor can change or end its service, its limits or its pricing at any time. Affected devices or functions may then stop working or be removed.
- A command whose result cannot be confirmed is shown as Unconfirmed and is never retried automatically. Check the device itself.
- A numeric reading, such as a temperature, is stored at most once every 30 seconds for each reading on a device, unless it crosses a limit that an automation or alarm watches. What you see can be up to that much behind the device.
- If your plan ends or IoT Devices is turned off, alarms and automations stop with it. See IoT Devices and Your Plan.
- Alarms here supplement your approved smoke, carbon monoxide and other safety systems. They never replace them.
Health devices
Remote patient monitoring does not watch readings continuously and is not an emergency service. Readings from health devices are for review by your organization's clinicians. They are not a diagnosis or treatment.
What the platform does to help
- A safety-critical control cannot be used until someone turns it on for that device, with a recorded reason and their password. It can be set to Needs two people, so that a second person confirms every use. Safety-critical controls are never available to SI members, links or voice.
- Security actions can ask for a password, as often as your organization sets, and every one is recorded.
- Every command is written to a record that no one in your organization can edit or delete.
Your responsibility
You decide who in your organization may operate each device, and what you share, automate or expose to voice. Do not give access to anyone who is not entitled to it, and do not use the platform to operate a device in a way that could injure a person or damage property.
संबंधित लेख
अन्य मार्गदर्शिकाएं जो इस बारे में प्रश्न पूछती हैं।.
Uncertain कमांड का क्या मतलब है
जब यह विक्रेता तक पहुंच सकता है, तो एक आदेश की पुष्टि नहीं की गई है, लेकिन कुछ भी यह पुष्टि नहीं की कि डिवाइस ने काम किया। मंच का अनुमान नहीं है, और यह कभी भी अपने आप में फिर से आदेश नहीं भेजता है। जहाँ आप इसे देखते…
अलार्म नियम कैसे बनाएं
अलार्म नियम बताता है कि अलार्म क्या बढ़ाता है, यह कितना गंभीर है, और कौन कहता है। यहां अलार्म आपके अनुमोदित धुएं, कार्बन मोनोऑक्साइड और अन्य सुरक्षा प्रणालियों के पूरक हैं। वे उन्हें कभी नहीं बदल सकते। शुरू करने से पहले…
अलार्म Escalation समझाया
Escalation सुनिश्चित करता है कि अलार्म किसी तक पहुंचता है। यदि कोई इसे स्वीकार नहीं करता है, तो अगला कदम अधिक लोगों को बताता है। एक नीति चरणों की सूची है एक escalation नीति 8 चरणों तक है। प्रत्येक चरण कहता है जब ऐसा…
आईओटी डिवाइस क्या है और यह क्या नहीं है
आईओटी उपकरण स्मार्ट-डिवाइस को आपके संगठन को पहले से ही उपयोग करते हैं, जैसे कि आपके ताले, थर्मोस्टैट्स, लाइट, सेंसर, मीटर और वाहनों के पीछे ऐप या क्लाउड खाता, ताकि आपकी टीम उन्हें एक स्थान पर देख, नियंत्रित, साझा और…
Device Functions and Safety Classes Explained
Every device is made of functions: the things you can read or do with it, such as reading a lock's state, locking, unlocking, setting a level or reading a temperature. Access in IoT Devices is given per function, not…
अलार्म कैसे स्वीकार करें
एक अलार्म को स्वीकार करने से सब कुछ पता चलता है कि आपने इसे देखा है और इसके साथ काम कर रहे हैं। यह भी अलार्म अपनी नीति के अगले चरण के लिए बढ़ रही रोक देता है। शुरू करने से पहले आपको Acknowledge IoT अलार्म सही और अलार्म…
